A bidet spray, more commonly termed as handheld bidet or sometimes, a bidet shower is nothing but a nozzle fitted on hose to spray water in controlled manner. These bidet sprays can serve numerous functions and needs such as personal cleaning, general cleaning or filling water containers.
Before commencing the installing or replacing step, it would wise to gather all the necessary tools and supplies. In addition, consider which model of bidet spray suits your toilet and plumbing the best. A bidet spray replacement service can also help you with installation or replacement of bidet spray.
Installing a New Bidet Spray
· Shut Off Water Supply:First step in any installation of bidet spray is switching off water supply to toilet tank. This is done in order to avoid any leakages or overflow incourse of installation.
· Disconnect Water Supply Line: After this, it will be necessary to detach water supply hose from toilet tank. Use wrench or your bare hands to unscrew water supply hose fastened to base of toilet.
· Install the T-Valve:T-valve is an important part of installing bidet spray, as it allows the attachment of both toilet and bidet to water supply.T-Valve should be attached to the water supply inlet. Note that it is better to tighten the T-valve properly to prevent any leakage through this joint. Visit our website plumbersingapore.org/to book a plumber to perform the installation for you.
· Connect Water Supply and Hose:Next, screw the T-Valve in its place and finally fix the old water supply hose into the upper opening of the T-Valve. In addition, the bidet hose must be connected to the lateral outlet of the T-Valve.
· Turn on The Water Supply:Turn the water supply on. Please inspect all connection points for any signs of leaks. Use plumber’s tape if there is any leakage.Now, test the bidet spray. The pressure of the water can be controlled from the T-valve or the spray head.
Replacing and Already Existing Bidet Spray
Replacing a bidet spray is relatively easy because the whole plumbing setup is in place. You only have to remove the fault or old spray and attach a new one.
· Turn Off Water Supply: Whenever you work with bidet sprays, please turn off the water supply to avoid any mess.
· Take Out Old Bidet Spray:Using a wrench or using your hands, disconnect the hose from the T-valve or water source. If the old spray nozzle is still on the work hose, take it off too.
· Attach New Bidet Spray:Now, take the new bidet spray and connect the hose to the previously disconnected hose connection without further modifications. The T-valve does not need to be changed in most cases. But if the new spray comes with a new T-valve, you can replace the existing one.
· Testing New Bidet Spray: After new spray has been installed, please switch on the water supply. Inspect the joints for any sign of leaks and do the needful to stop them. Test the new bidet spray functionality as well as the pressure of the water.
Maintenance and Care
In order to ensure longevity of your bidet spray, regular maintenance is recommended. On a regular basis, make certain that there isn’t any leakage. Also, should there be a reduction in spray pressure experienced after usage for a long time, check the hose and see if it is blocked or damaged and if it is, replace it.
Final Thoughts
Like any other fixture, a bidet spray needs periodic servicing and gives way to new installations over time. Installing or replacing bidet spray can improve comfort and hygiene in bathroom. By following steps listed above, you can easily perform that task yourself. But if you want a plumber to do that for you, book one.With the help of such experts, homeowners can use the advantages of a properly functional bidet spray free of the worries of defective fitting and plumbing problems.